Related Manuals for Lincoln Electric IDEALARC TIG-250/250
Summary of Contents for Lincoln Electric IDEALARC TIG-250/250
- Page 1 February, 1997 IM315 Idealarc TIG 250/250 8329; 8492; 8493; 8564; 8627; 8758; 8761; 8809; 8826; 8827; 8833; 8834; 8835; 8836; 8933; 9378; 9610; 9611...
Need help?
Do you have a question about the IDEALARC TIG-250/250 and is the answer not in the manual?
Questions and answers
I just bought a idealarc 250 tig used hooked it up it will come on the fan will work the gas solenoid will come on shortly but the foot controls would not work the gas solenoid or power output checked the foot controls good checked the tig control board no power to fuse on board checked the capacitor no power to the capacitor the switch for inert gas is on and the hf switch is on please where do I go from here
1. Check the Spark Gap – Ensure it is set to the correct specifications as mentioned in the manual.
2. Verify Gas Flow – Check if adjusting the gas flow affects the flame. Confirm that the gas is flowing properly from the rotameter to the torch.
3. Inspect the Torch Assembly – Ensure the electrode, collet size, and other components are correctly assembled and positioned.
4. Review the Machine Settings – Verify that switches are set correctly for the intended welding process (Steel or Aluminum).
5. Consult the Manual – Obtain the exact manual for the specific model and check for any missing settings or troubleshooting steps.
6. Check for an HF Box – If an add-on High-Frequency (HF) box is used, confirm its connections match the diagram in the manual. Ensure all cables were properly reconnected if the machine was moved.
7. Verify Internal Components – If issues persist, check if internal components like transformers, circuits, or solenoids are malfunctioning.
This answer is automatically generated