Operation Check - Mitsubishi Electric MELSEC Q Series Quick Start Manual

Execute the monitor to display the "Monitor status" screen.
The ON/OFF status of bit devices can be checked on the ladder screen.
Contacts/outputs set to ON are displayed in blue.
Right after the program execution, bit devices X02, Y1E, and Y1F are lit blue due to the instructions
from the program.
Displayed in blue
2.

Operation check 1

Displayed in blue
3.
Operation check 2
Displayed in blue
4.
Operation check 3
Displayed in blue
P
oint
While pressing the
to turn them OFF.
Displayed in blue
Displayed in blue
Displayed in blue
Displayed in blue
key, double-click devices set to ON in Operation checks 1 and 2
Shift
1 Double-click X0 while pressing
the key X0 turns ON.
2 Double-click X1 while pressing
the key X1 turns ON.
Y10 turns ON.
3 Double-click X2 while pressing
the key X2 turns ON.
Y1E and Y1F turn OFF.
27