Advertisement
hints on using your
toaster
Select a lower setting for light
browning, for toasting one slice only
or for dry bread.
When toasting a single slice of
bread, you may notice a variation in
toast colour from one side to the
other - this is normal.
Dry/stale bread toasts more quickly
than fresh bread and thinly sliced
bread toasts more quickly than
thickly sliced bread. Therefore the
browning control should be set at a
lower setting than usual.
For best results ensure that the
bread slices are of an even
thickness, freshness and size.
In order to achieve uniform browning
we recommend you wait a minimum
of 30 seconds between each
toasting so that the control can
automatically reset. lternatively
select a lower setting when
additional toasting is carried out.
TTP210/TTP230 series For best
results larger slices of bread are best
positioned long ways in the slot.
warming rack safety
(TTP220/TTP230)
1
Never set the browning control
higher than
warming rack.
2 Never completely cover the warming
rack.
3 When using the warming rack, never
wrap the food up. Plastic wrapping
will melt and could catch fire. Foil will
reflect heat, damaging the toaster.
4 If you're using the toast slots, lower
the warming rack so it can't burn
you.
when using the
to use the warming rack
(TTP220/TTP230)
1 Raise the warming rack into position
by pressing down on the warming
rack selector
2 Put your food on top of the rack
(slicing thick items in half will speed
up the warming process).
3 Set the browning control no higher
than
. Lower the lever.
4 The lever will automatically rise at the
end of the warming cycle. Turn the
items over and repeat the operation.
Watch to make sure they don't burn.
5
lways lower the warming rack after
use by pressing the warming rack
selector until it locks down.
care and cleaning
1 Before cleaning, unplug your toaster
and let it cool down.
2 Slide out the crumb tray
then replace. Do this regularly:
crumbs can smoke or even burn.
3 Wipe the outside of the toaster and
the warming rack with a damp cloth,
then dry. Do not use abrasives.
service & customer care
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
using your toaster or
servicing or repairs (in or out of
guarantee)
call Kenwood customer care on 023
9239 2333.
number ready (e.g. TTP200)
and date code (5 digit code
e.g. 13L35) ready. They are on
the underside of your toaster.
spares and attachments
call 0844 557 3653.
other countries
Contact the shop where you bought
your toaster.
Designed and engineered by
Kenwood in the UK.
Made in China.
5
.
. Clean,
ave your model
Advertisement
