Thank you for purchasing Aero 360 Steam Pro from JML. To get the best results from this presser, please read these instructions in full and keep them safe for future reference. Contents Intended Use ______________________________________________________ 4 Safety Instructions __________________________________________________ 4...
Intended Use • This device is intended to be used to dry and press textiles, for example blouses and shirts. Delicate textiles such as wool or similar fabrics must not be pressed on the presser. Always follow the care labels for the textiles! •...
Page 5
Danger of Injury ■ Always lay the mains cable in such a way that it does not present a trip hazard. ■ The device must not be moved during use. ■ Burn risk, caution must be taken when using the unit. Danger of Electric Shock ■...
■ Protect the device from heat, naked flames, extreme temperatures, persistent moisture, wet conditions and collisions. ■ Do not use any corrosive or abrasive cleaning agents to clean the device. These can damage the surface. Items Supplied and Device Overview 1 Hanger 2 Telescopic rod 3 Fan...
Assembly 1. Plug the Telescopic rod (2) into the recess on the top of the Motor unit (4). 2. Place the Hanger (1) onto the Telescopic rod (2). When you do this, make sure that the slight bend in the Hanger (1) points forwards. 3.
Page 8
3. Pull the garment which is to be pressed over the Nylon balloon and the hanger (1) and do up the buttons if necessary. Make sure that: – the collar is fitted over the collar section (9) on the Hanger (1), –...
Cleaning and Storage CAUTION! ■ Pull the Mains plug out of the plug socket and allow the device to cool down completely before doing any cleaning! ■ Never immerse the device, the mains cable or the mains plug in water or other liquids! ■...
Need help?
Do you have a question about the Aero360 Steam Pro and is the answer not in the manual?
Questions and answers