Access The Cli Via Telnet - Technicolor TG672 Setup And User Manual

4 CONFIGURATION TOOLS

4.3.1 Access the CLI via Telnet

Requirements
Your computer must be connected to the Technicolor Gateway.

For more information, see
For Microsoft Windows 7 and Vista: the Telnet service must be enabled on your computer.

For more information, consult Windows' help.
Access via a local Telnet Session
Proceed as follows:
1 Open the Command Prompt or Terminal.
2 Type telnet followed by the IP address of the Technicolor Gateway (the default IP is 192.168.1.254) or the DNS name
assigned to your Technicolor Gateway (by default dsldevice.lan):
telnet 192.168.1.254
3 The CLI now prompts you to log in. For more information, see
Remote access
It is also possible start a CLI session from the Internet. For more information, see
50
"3.3 Connecting Your Network Devices to the Technicolor Gateway" on page
"Login" on page 55.
"4.4 Access From the Internet" on page
30.
58.
E-DOC-CTC-20100728-0008 v2.0