Related Manuals for Shark AZ1000 Series
Summary of Contents for Shark AZ1000 Series
- Page 1 APEX DuoClean with Zero-M ® ® ™ Powered Lift-Away ® Upright Vacuum AZ1000 Series OWNER’S GUIDE...
-
Page 2: Important Safety Instructions
GENERAL WARNINGS 11. Only use Shark® branded filters 24. Turn off all controls before plugging in 21. Your Shark® vacuum may not be or unplugging the vacuum. and accessories. Failure to do so Your vacuum cleaner may consist of designed to stand up on its own. - Page 3 ASSEMBLY ASSEMBLY (Click) (Click) (Click) (Click) 1. Place motorized floor nozzle on floor and insert wand, pressing it in until it clicks securely into place. 2. Place pod onto wand and slide down to connect. 3. Insert handle into wand, pressing it in until it clicks securely into place. 4.
-
Page 4: Cleaning Modes
WHOLE-HOME CLEANING WHOLE-HOME CLEANING SETTINGS CLEANING MODES POWER SWITCH SURFACE SELECTOR UPRIGHT Thick Carpet & Area Rug Cleaning Press power button to turn on vacuum. To engage brushroll, place foot on floor Please note the brushrolls will not spin Set surface selector to Thick Carpet/Area Rug. nozzle and tilt handle back. -
Page 5: Emptying The Dust Cup
EMPTYING THE DUST CUP CLEANING AND REPLACING THE FILTERS IMPORTANT: Unplug the power cord before performing any maintenance. CLEANING FILTERS Regularly clean and replace your filters to keep your vacuum's suction power optimal. To clean filters, rinse with cold water only to prevent damage from cleaning chemicals. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts. - Page 6 MAINTENANCE CHECKING FOR BLOCKAGES WITH ™ Zero-M Technology ™ TECHNOLOGY Zero-M Technology™ actively removes hair wrap from your brushroll while you vacuum. If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught in the brushroll.
-
Page 7: Available Accessories
AVAILABLE ACCESSORIES TROUBLESHOOTING Vacuum is not picking up debris. No suction or light suction. 12” Crevice Tool • Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the Clean in corners and other tight spaces or filters before reinserting in the vacuum. - Page 8 REGISTER YOUR PURCHASE Benefits of registering your product and FIVE (5) YEAR LIMITED WARRANTY creating an account: registeryourshark.com • Get easier, faster product support and The 5-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating access to warranty information LLC.
- Page 9 PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Owner’s Guide is designed to help you get a complete understanding of your new Shark® APEX® DuoClean® with Zero-M™ Powered Lift-Away® Upright Vacuum. SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-800-798-7398 sharkclean.com...
Need help?
Do you have a question about the AZ1000 Series and is the answer not in the manual?
Questions and answers
The lights on the vacuum keep fluctuating from the vacuum head to the handle, as if I've detached the wand. It still works (I think) but the suction is not great and it seems to be getting worse. The rollers still move, it isn't blocked, not sure what I need to do to get it fixed.
Fluctuating lights between the vacuum head and handle on a Shark AZ1000 Series vacuum could be caused by poor electrical contact inside the wand connection. The spring-loaded connectors inside the wand might not be making proper contact with the pins in the main body.
To resolve this, unplug the vacuum, detach the wand by pressing the release button, and inspect the three holes inside the wand connection. Clean them using a small brush to remove any dust or debris. Applying an electrical-grade silicone spray that is plastic-safe can help lubricate the connectors and improve contact.
For suction issues, check for blockages in the hose, wand, or nozzle. Ensure the brushroll is free of obstructions and that the surface selector is set correctly for the type of flooring. If the motorized floor nozzle overheats (flashing red light), turn off the vacuum, unplug it, remove any blockages, and allow it to cool for at least 60 minutes before restarting.
This answer is automatically generated
Roller will not spin. Replaces hose and floor piece?
The roller on the Shark AZ1000 Series vacuum may not be spinning after replacing the hose and floor piece due to poor connection at the spring-loaded connectors inside the wand release. To fix this, unplug the vacuum, press the wand release at the base, and clean the three female spring-loaded connectors inside the holes using a small brush. Applying an electrical-grade plastic-safe silicone spray can help lubricate the connectors for better contact. If the issue persists, check for a broken belt or other mechanical problems.
This answer is automatically generated