Power Data Gateway Troubleshooting; Monitoring Via The Myreserve Portal; Integrating The Myreserve Into The Energymanager - solarwatt MYRESERVE MATRIX Installation And Operating Instructions Manual

Power Data Gateway troubleshooting

If you experience problems when confi guring a Power Data Gateway, you can reset the device. To do so, go to the home
page of the PDG web server and click the Factory Reset button.
Monitoring via the MyReserve Portal (with PDG)
Monitoring data is transmitted from the MyReserve Matrix
to the PDG via Bluetooth; from there, it is transmitted to
the router via LAN or wireless connection.
You can then view the data using a web browser, the My-
Reserve Portal.
To access the Portal, visit:
https://myreserve.solarwatt.com
Monitoring via the MyReserve App (with PDG)
HINWEIS HINWEIS HINWEIS HINWEIS
The MyReserve app will be available for iOS devices through the App Store beginning 02/2018 and for Android devices
in PlayStore beginning 03/2018.
Monitoring via the EnergyManager (without PDG)
For integration of the MyReserve into the EnergyManager, please follow the EnergyManager instructions or refer to
the installation instructions for the EneregyManager in the download area of our website www.solarwatt.com.au.
NOTE NOTE NOTE NOTE
You can fi nd a wiring diagram for the electrical connection in the appendix: Circuit diagram MyReserve with
EnergyManager.
Page 44 Subject to changes | © 2018 SOLARWATT GmbH | AZ-TM-PME-1182 | Rev 004 | Version: 01/2018
Explain to your customers how to register on the MyRe-
serve Portal.
Give them the MyReserve serial number they will need
to complete the registration process. The serial number is
printed on the top of the MyReserve Command.
The customer then sets their login and password, and
enters all additional required information.
Once customers have fi nished registering, they can view
their monitoring data through the MyReserve Portal.