Table of Contents
Advertisement
Maintenance
10-14
Cleaning, Disinfection, and Sterilization
Cleaning
Clean the instrument as necessary by wiping the housing surfaces with a soft dry cloth or a
soft cloth that is lightly dampened with soapy water or 70% Isopropyl alcohol. Clean the
Patient Eyepiece window and Operator LCD Display window with a soft, lint free cloth
lightly dampened with commercially available window cleaners (do not use soap) or 70%
Isopropyl alcohol.
Disinfection
Disinfect the patient contact surfaces (the Forehead Rest, Chinrest and Patient Response
button) as necessary by wiping the surfaces with a soft cloth that has been lightly
dampened with 70% Isopropyl alcohol. Allow the surface to dry thoroughly before patient
contact. Contact surfaces should always be cleaned between patients.
Caution: Do not allow cleaning or disinfection solutions or other liquids to seep into
the seams in the housings or along the LCD display. Do not spray cleaning or
disinfection solutions or other liquids directly onto the instrument. Damage to
internal components may occur and are not covered by the instrument warranty.
Sterilization
Do not sterilize the instrument or any of its components.
Humphrey Matrix User Manual
2660021138935 Rev. F 2015-11
Advertisement
Table of Contents
Need help?
Do you have a question about the Humphrey Matrix 800 and is the answer not in the manual?
Questions and answers
how to move a test to another patient
The Zeiss Humphrey Matrix 800 does not support transferring a test to another patient. However, test data can be exported and transferred to another Matrix instrument using a CD. To do this, install the CD into the Matrix CD drive. Note that Carl Zeiss Meditec does not support importing Matrix data to a PC or using third-party software for analysis. Also, optical disks should not be used for long-term storage and should be handled carefully to avoid damage.
This answer is automatically generated
HI. WE HAVE THE HUMPHREY MATRIX VISUAL FIELD. THE PATIENT IS ACCURATELY PRESSING THE RESPONSE BUTTON, BUT THE DEVICE IS NOT RECORDING THE RESPONSE. WHEN THE RESULTS ARE PRINTED IT APPEARS AS IF THE PATIENT MISSED EVERY SINGLE STIMULUS