Related Manuals for Logan 525
Summary of Contents for Logan 525
- Page 1 Model 525 Do-It-Yourself MAT CUTTING KIT 24" guiderule, bevel cutter, matknife, blades, matboards, rub-on transfers and basic matcutting book. www.logangraphic.com INSTRUCTION AND OPERATION MANUAL...
- Page 2 Preparation Caution!! Mat Cutting Blades are Sharp Inserting Blades 1. Matknife Remove one blade from pack of 5. Remove nut and cover plate. Align blade hole over thread. Be sure sharp edge of blade is over curve in the handle. Reassemble cover plate.
- Page 3 4. Cutting Fig. 3 Draw the matknife toward you along the straight edge keeping contact pressure on the Straight Edge and downward pressure on the Matknife. (Fig3). WARNING! Be careful when knife reaches the end of the mat so that it does not ”jump” toward you. Bevel Cutter Cutting a Single Mat 1.
-
Page 4: Trouble Shooting
2. Change the Blade. A dull blade will flare out causing a hook or curve. A NOTE ON BLADES: No two blades will have the same lifespan. Always start with a new blade before each project to insure best results. Logan Graphic Products, Inc. 1100 Brown Street Wauconda, IL 60084...
Need help?
Do you have a question about the 525 and is the answer not in the manual?
Questions and answers