Logan 301-S Instruction And Operation Manual

Mat Cutter
C O M P A C T
INSTRUCTION AND OPERATION MANUAL
32" (81.28cm) mat cutting system with straight and bevel
cutting heads - cuts board up to 29.5" (74.93cm) wide.
NOTE: This mat cutter is designed to cut only 4-ply mat board.
For best results use only
authentic Logan blades
Replacement Blade #270
Warranty
Logan Graphic Products, Inc. ("Logan") warrants the 301-S COMPACT to be free from defects in parts and workmanship for
a period of two years from the date of original purchase. Logan warrants that it will either repair or replace, in its sole
discretion, any necessary replacement parts found to be defective. Should the product need to be returned to Logan for
repair or replacement parts, authorization for any return must come from Logan in writing. Costs of returning the product to
Logan, including insurances, shall be borne by the purchaser. Logan shall not be liable for any damages or losses, incidental
or consequential, direct or indirect, arising from the use of this product. This warranty extends only to the original purchaser
and is not assignable or transferable. This warranty is in lieu of all other warranties, expressed or implied.
Purchase Date
ID Number (on bottom of board)
Date (on bottom of board)
INTRODUCTION:
Congratulations on your purchase of the Logan Compact Mat Cutter. This
versatile and dependable tool will prove to be a useful device for those
seeking professional results from a low priced, easy to use mat cutter.
This instruction manual is written to aquaint you thoroughly with this
product. Please take some time to familiarize yourself with it before cut-
ting. You will find that the time taken will be well worth it and you will
be cutting quality mats in no time.
TABLE OF CONTENTS:
Check of Contents
Identification of Machine Components
Work Surface/Orientation
Blade Installation
Operation
A. Straight Cutting a Mat Board to Size
B. Cutting a Beveled Opening
C. Cutting an Opening in a Mat Board Longer than 32"
D. Cutting a Beveled Opening Left Handed
E. Cutting a Straight Opening
Adjustments & Maintenance
A. Blade Depth Adjustment
B. Re-Parallel the Mat Guide
C. Helpful Hints
Trouble Shooting
Parts schematic available online at
www.logangraphic.com
Logan Graphic Products, Inc.
Phone (847) 526-5515 Fax (847) 526-5155
M O D E L 3 0 1 - S
Printed on recycled paper
with vegetable inks.
1
1
1
1
2
2
2
2
2
3
3
3
3
www.logangraphic.com
1100 Brown Street
Wauconda, IL 60084 USA
Toll Free (800) 331-6232
L158N4 8_08