Panasonic LB-DH7 Series Operator's Manual page 36

Operations
Interface <Monitor>
Indicates the settings of the interface port.
Server connected to the unit settings that are not configured with the Web interface are also displayed.
"SAS"
Speed
SAS Address
"iSCSI Interface"
≥ To change the setting, make the selection in the following order:
"Configure" "Interface" (
Port Indicates an iSCSI port.
iqn Indicates the node name.
CHAP Indicates information concerning the CHAP authentication.
Indicates the target name.
Target Name The target name is indicated only when "CHAP" has been set to "Target" or "Target +
Initiator".
Indicates the initiator name.
Initiator Name
The initiator name is indicated only when "CHAP" has been set to "Target + Initiator".
Web interface operation
Indicates the connection speed settings.
≥ The unit is [bps].
Indicates the WWID (World Wide Identifier).
44)
36