Removing Top Cover - NEC Express5800/R120g-2M User Manual

Chapter 2 Preparations
1.5

Removing Top Cover

Remove Top Cover when installing or removing the optional component or change internal cable connection.
1. See steps 1 to 5 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Slide Top Cover (front) toward the front of the server while pressing Release Button on the cover.
3. Lift Top Cover (front), and remove it from the server.
4. Loosen the cap screw of Top Cover (rear), and slide the cover toward the rear of the server.
5. Lift Top Cover (rear) and remove it from the server.
44
Tips
Screw holes on the place where front and rear top covers overlap each other, are not
used.
Express5800/R120g-2M User's Guide
1. Installing Internal Optional Devices