Windscreen wipers
130
X
Fold the wiper arm away from the windscreen.
X
Hold the wiper arm and turn the wiper blade in
the direction of arrow : away from the wiper
arm as far as it will go.
X
Slide catch ; upwards in the direction of the
arrow until you can feel and hear it engage in
the changing position.
X
Remove wiper blade = from wiper arm by
pulling it in the direction of the arrow.
X
Insert new wiper blade = into the wiper arm
in the direction of the arrow.
Please take the differing lengths of the two
wiper blades into account:
Driver's side - long wiper blade
R
Co-driver's side - short wiper blade
R
X
Slide catch ; downwards in the direction of
the arrow until you can feel and hear it
engage.
X
Fold the wiper arm back onto the windscreen.
X
Remove protective film ? from the service
indicator on the tip of the wiper blades.
Rear window wiper
Tailgate
X
Fold wiper arm : away from the rear window
until you hear it engage.
X
Hold wiper arm : and pull wiper blade ; in
the direction of the arrow away from the wiper
arm.
X
Place new wiper blade ; onto wiper arm :.
X
Hold wiper arm : and push wiper blade ; in
the opposite direction to the arrow until it
engages.
X
Make sure that wiper blade ; is in the cor-
rect position.
X
Fold wiper arm : back onto the rear window.
Need help?
Do you have a question about the Vito 111 CDI/BlueTEC and is the answer not in the manual?
Questions and answers
How to operate sat nav
To operate the sat nav in a Mercedes-Benz Vito 111 CDI/BlueTEC:
1. Insert the Navigation Module
- Open the glove compartment.
- Insert the navigation module into the device holder.
- The built-in battery charges when the vehicle ignition is on.
- Secure the module by removing the catch on the front side of the device holder.
- Close the glove compartment.
2. Switch on the Navigation System
- Press the ß button, or
- Press the 9 button repeatedly until the main menu bar appears.
- Select "Navi" to open the main menu.
*Note:* If the battery was fully discharged, the system may take up to 1 minute to be ready.
This answer is automatically generated