Help Guide | Formatting Memory - Sony Walkman NW-WS413 Help Manual

Help Guide
How to Use
Digital Music Player
NW-WS413/WS414
Formatting memory
You can initialize your Walkman by formatting the memory.
1. Check that the playback is paused.
2. Press and hold the button (
the right ( ) side of your Walkman blinks in orange quickly.
3. Release the button (
The lamp ( ) lights up in red.
4. Press the Previous/Next button (
lights up in red.
5. Press the button (
The lamp ( ) blinks in green quickly while formatting. The lamp (
Note
Be sure not to initialize (format) the memory of your Walkman using a computer. If you have formatted it with a
computer, format it again using the Walkman.
Formatting the memory erases all content data (songs, etc., including the sample data installed at the factory, and the
supplied software installer). Be sure to check the data stored in the memory and export any important data to your
computer before formatting.
Related Topic
Confirming the Walkman status by the OPR lamp
) on the right (
).
) on the right (
) while the lamp ( ) is lit in green.
) side of your Walkman for about 17 seconds until the lamp (
) side of your Walkman within 30 seconds after the lamp (
) turns off when formatting is completed.
91
) on
)