Cleaning And Maintenance; Disassembling; Cleaning - ResMed AirSense 10 AutoSet for Her Plus Clinical Manual

Cleaning and Maintenance

It is important that the AirSense 10 Plus device is cleaned regularly to ensure optimal therapy. The
following sections will help with disassembling, cleaning, checking and reassembling the device.
WARNING
Regularly clean the tubing assembly, humidifier and mask for optimal therapy and to prevent
the growth of germs that can adversely affect the patient's health.

Disassembling

1. Hold the humidifier at the top and bottom, press it gently and pull it away from the device.
2. Open the humidifier and discard any remaining water.
3. Hold the cuff of the air tubing and gently pull it away from the device.
4. Hold both the cuff of the air tubing and the swivel of the mask, then gently pull apart.

Cleaning

You should clean the device weekly as described. Refer to the mask user guide for detailed
instructions on cleaning the mask.
1. Wash the humidifier and air tubing in warm water using mild detergent.
2. Rinse the humidifier and air tubing thoroughly and allow to dry out of direct sunlight and/or heat.
3. Wipe the exterior of the device with a dry cloth.
Notes:
The humidifier may be washed in a dishwasher on the delicate or glassware cycle (top shelf only).
•
It should not be washed at temperatures higher than 65ºC.
• Do not wash the air tubing in a dishwasher or washing machine.
• Empty the humidifier daily and wipe it thoroughly with a clean, disposable cloth. Allow to dry out
of direct sunlight and/or heat.
English 21