Kathrein UFS 913 Operating Instructions Manual page 26

If you subsequently want to delete the set borders, switch to the "Reset border positions" fi eld and

press the button to confi rm deletion of the borders. You can then set new values for the borders.
Once you have set all the borders, press the

Press the (green) button to move to the next menu.
The following on-screen display appears:
LNB Type:
If your reception system does not have a Universal LNB, use the
that are used in your reception system. You can choose from the following LNB types:
- Universal or
- Simple or
- User-defi ned
LNB Frequency (MHz):
You only need to specify this data if your LNB type is not "Universal". The data required differ between the
settings "simple" and "User-defi ned". On this aspect, also refer to the documentation supplied with your LNB.
- Selection "simple" LNB:
- Selection "User-defi ned":
Stop on Signal:
Select the selection fi eld "Stop on Signal". Here, you can select whether the motorised antenna should
stop its rotary movement immediately on reception of a signal from the desired satellite. You can choose
between "On" and "Off".
26
Connection and set-up

button.
Use the number pad to enter the LNB frequency
To enter the required low, high and limit frequencies press the

button. The entry is made using the number pad

buttons to select the LNB types