Connections
8
Philips
ColourChaser Touch Manual
I
C
S
I
2
3
4
USB
100 - 240 V
Controller to power supply
Connect a UTP patch cable (max. 40 meter) between the RJ-45 socket on the back of the
controller and the OUT socket on the power supply before connecting the power supply to AC.
When power is applied to the power supply unit, all 3 LEDs will light for 2 seconds and then the
"ON" LED will illuminate green. The "CONNECT" LED illuminates green when the controller is
connected and receiving power.
DMX
OUT
IN
Power
Supply
DMX
Unit
Luminaire
DMX
DMX
DMX
DMX
Luminaire
Luminaire
DMX
After 30
Luminaires
a DMX
booster
is required