Ametek JOFRA AMC910 Reference Manual page 100

TSENS_TYPE
This command sets the temperature mode to thermocouple (TC) or
Resistance Temperature Detector (RTD) for temperature source and
measurement.
Parameters:
Response:
Example:
TSENS_TYPE?
This command returns the present temperature mode, thermocouple (TC)
or Resistance Temperature Detector (RTD).
Parameter:
Response:
Example:
*TST?
This command runs a series of self-tests and returns a "0" for pass or a "1"
for fail. If any faults are detected, they are logged into the fault queue
where they can be read by the FAULT? query.
Parameter:
Response:
Example:
100
IEEE-488 RS-232
<value>
where <value> is one of the following:
TC
RTD
<None>
TSENS_TYPE RTD
This example sets the temperature mode to RTD.
IEEE-488
<None>
<value>
where <value> is one of the following:
TC
RTD
TSENS_TYPE?
TC
This example indicates that the present temperature
mode is thermocouple.
IEEE-488 RS-232
<None>
<value>
where <value> is one of the following:
0
1
*TST?
1
This example runs the self test and indicates that it
12-03-2008
Sequential
Thermocouple
Resistance Temperature Detector
RS-232 Sequential
Thermocouple
Resistance Temperature Detector
Sequential
failed self test
passed self test
Overlapped
Overlapped
Overlapped
126782 00