Commands To Configure Dhcp Server - Zte ZXR10 User Manual

Parameter description:
max-user
aging-time
alarm-percent

5.4.3 Commands to Configure DHCP Server

1.
A.B.C.D
[ A.B.C.D ]
2.
A.B.C.D
3.
Chapter Error! Style not defined. Error! Style not defined.
Name Range
512~1024
10~100,000
1~10
dhcp server dns
Command mode: Configure mode
Function: Configure the IP addresses of the master/slave DNS server in the
DHCP server
Command format: wlan (config) # dhcp server dns A.B.C.D [A.B.C.D]
Parameter description:
Name Range
IP address
IP address
dhcp server gateway
Command mode: Configure mode
Function: Configure the IP address of the default gateway of the DHCP server
Command format: wlan (config) # dhcp server gateway A.B.C.D
Parameter description:
Name Range
IP address
dhcp server leasetime
Command mode: Configure mode
Function: Configure the address lease time of the DHCP server
Command format: wlan (config) # dhcp server leasetime time-value
5-7
Description
Maximum capacity of the MAC address list
Aging time of the MAC address list entries
Percent of alarms
Description
IP address of the master DNS server
IP address of the slave DNS server (optional)
Description
IP address of the gateway