Table of Contents
Advertisement
How Caller ID operates
When you receive a call, the name of the caller will appear next to the line (A1
or D2) in the cordless phone display, beginning just before the second ring.
The information will continue to be displayed until the line is disconnected.
♦
To display the number in addition to the name, press
initial display, press
Display example:
A1 JOHN DOE
D2
♦
To answer the call, press any key (except
Note: Some caller ID services may not provide the name of the caller. In this case,
only the phone number will appear.
Display messages
One of the following messages will appear while the cordless phone rings if
caller information is not available.
NO SERVICE
CALLER-ID ERROR Noise on the telephone line prevented reception of
OUT OF AREA
PRIVATE CALL
again.)
ENTER
Press
ENTER
No caller information was received from your telephone
company. Make sure that the telephone company has
activated your service.
caller information.
The call was made from an area which does not have a
caller identification service, or the caller's service is not
compatible with that of your local phone company.
Caller information was not provided by the telephone
company at the caller's request.
. (To return to the
ENTER
A1
JOHN DOE
525-8693
SELECT
LINE
,
, or
) at any time.
ENTER
OFF
OFF
Caller ID
29
Advertisement
Table of Contents
