Table of Contents
Advertisement
Performing a Blood Glucose Test
12. A blood drop icon will appear on the display window and
will be accompanied by a beep (if volume is turned on).
Apply the blood sample within 2 minutes.
13. Place the lancing device against your fingertip and press
the release button.
14. Touch and hold the blood drop to the edge of sample
port until the view window is filled with blood. If the view
window is not completely filled with blood the test will
not start. If the blood sample was insufficient, discard
the test strip and repeat with a new GE006 Blood
Glucose Test Strip.
15. Countdown Mode will begin on the display window. After
5 seconds, your test result will appear.
28
12
13
14a
14b
14c
15
16. Pull off the depth adjustable cap. Without touching the used
disposable lancet, insert the lancet tip into the protective
lancet cover.
17. Hold the release button in one hand (see picture 17, step 1)
and pull on the plunger with the other hand (see picture 17,
step 2) to safely eject the used disposable lancet.
18. Discard the used disposable lancet into an appropriate
puncture-proof or biohazard container.
19. Replace the depth adjustable cap after finishing the test.
Performing a Blood Glucose Test
16
17
2
1
18
19
29
Advertisement
Table of Contents
