Hitachi Universal Storage Platform V Configuration Manual page 45

← Start the fx utility.
# fx –x
fx version 6.5, Jul 11, 1999
fx: "device-name" = (dksc)
fx: ctlr# = (0) 8
fx: drive# = (1) 0
fx: lun# = (0) 15
...opening dksc(8,0,15)
...drive selftest...OK
Scsi drive type == Hitachi
----- please choose one (? For help, .. to quit this menu)-----
[exi]t
[b]adblock/
fx> r
----- partitions-----
part type
0: xfs
1: xfs 2052096 + 2048000
8: volhdr
10: volume
capacity is 4806720 blocks
----- please choose one (? for help, .. to quit this menu)-----
[ro]otdrive
[u]srrootdrive
fx/repartition> e
Warning: you will need to re-install all software and restore user data
from backups after changing the partition layout. Changing partitions
will cause all data on the drive to be lost. Be sure you have the drive
backed up if it contains any user data. Continue? y
Enter .. when done
Figure 3-1
Hitachi Universal Storage Platform V/VM Configuration Guide for SGI
OPEN-3
[d]ebug/
[exe]rcise/
blocks
266240 + 2048000
1002 + 1000
0 + 4096
0 + 4806720
[o]ptiondrive
[re]size
Partitioning and Labeling the Disk Devices (without Fabric)
(continues on the next page)
Configuring the New Disk Devices
5244
[l]abel/ [a]uto
[r]epartition/
Megabytes (base+size)
130 + 1000
0 + 2
0 + 2347
[e]xpert
Press Enter to label a disk.
Enter the SCSI controller #.
Enter the TID.
Enter the LUN #.
Enter r for partition menu.
Enter e for expert menu.
Enter y to continue.
® ®
IRIX Host Attachment
3-3