Download Print this page

Gradient SW-S User Manual

With quad esl

SW-S/D

with QUAD ESL

USER GUIDE

Table of Contents

Need help?

Do you have a question about the SW-S and is the answer not in the manual?

Page 1 SW-S/D with QUAD ESL USER GUIDE...
Page 3 GRADIENT SW-S/D Congratulations for your purchase of Gradient SW subwoofer system for the Quad Electroacoustic loudspeakers. This manual covers also the active crossover- amplifier and special features of the loudspeaker system. We recommend you to read this manual entirely to fully utilize the high performance of...
Page 4 POSITIONING Gradient SW-S/D equipped with three adjustable feet with nuts. Adjust the three feet in such a way that loudspeaker stands steadily on the floor. Tighten the feet with nuts using a 10mm wrench. If necessary, the adjustable feet can be replaced by M6 spikes.
Page 5 +/- 60 degrees +/- 0.5 m Figure 1. The woofers can be oriented freely +/-60 degrees to reach the optimum bass performance. The mutual distance of the speakers can vary. In any case it is recommended to use symmetric layout. Up to several meters Figure 2.
Page 6 CROSSOVER-AMP The crossover/amplifier shall be connected like an ordinary power amplifier, after the preamplifier. The level of the signal feeding the bass amplifier can be adjusted continuously by a trimmer adjustments at the back of the unit. The adjustment range is +/- 10dB for both channels separately.
Page 7 40 kohm Output impedance 100 ohm Bass level adjustement +/- 10 dB Crossover frequency 110 Hz Dimensions (WHD) 465 x 60 x 412 mm Weight 5 kg AC Mains 110-250VAC, automatic detection Made in Finland by Gradient Labs Ltd www.gradient.fi...

Sw-d