System Settings; Web Configurator Access Rights - Gigaset N870 IP PRO Installation, Configuration And Operation

System settings

System settings

Web configurator access rights

On this page you define the access rights for the web configurator user interface.
¤
Settings System
Changing the web configurator password
For security reasons, you should frequently change the password for web configurator access.
There are two user roles with different user IDs, admin and user (
bled by default. You can activate it here.
The password is set depending on the user role. The administrator is allowed to change the pass-
word for both admin and user. Logged on as user you can only change the password for user.
If you have forgotten the password, you will have to reset the device to the factory
settings (
New password
¤
Enter a new password for the administrator/user access to the web configurator. Default:
admin/user
Repeat password
¤
Repeat the new password entered in the Repeat password field.
Show password
¤
To view the entered characters mark the check box near Show password.
Change password for all Dect Managers
¤
Click on the button, if you want the password to be assigned to all DECT managers.
The password can also be set individually for each DECT manager using the web configurator on
the DECT manager systems.
Activate user access
¤
Click on Yes/No to enable/disable the ID for the user role.
Enabling CLI access to the device configuration
Only available in the Integrator user interface.
It is possible to perform the device configuration via CLI (Command Line Interface) using SSH
from a remote system. Secure Shell (SSH) is a program for logging into a remote machine and for
executing commands on a remote machine. It provides secure encrypted communications
between two untrustworthy hosts over an insecure network.
Detailed information on CLI commands can be found in the online help of the web configurator.
78
Web configurator
page 18).
page 21). The user ID is disa-