Mitsubishi Electric 800 Series Installation Manualline page 12

Reinstallation of a base unit front covers
(a)
(a) Insert the upper hooks of the front cover (upper side) into the sockets of the inverter.
Securely install the front cover (upper side) to the inverter by fixing the hooks on the
sides of the cover into place.
(b) Tighten the mounting screw(s) at the lower part of the front cover (upper side).
(c) Fasten the front cover (lower side) with the mounting screws.
NOTE
• Fully make sure that the front covers are installed securely. Always tighten the
mounting screws of the front covers.
12 Setting Up
(b)
Fasten Fasten Fasten
(c)
Fasten Fasten Fasten