Table of Contents
Advertisement
Powering up the FLX UC 1000
The FLX UC 1000 is designed to be powered using Power over Ethernet (PoE).
If you have an Ethernet port that does not provide PoE, an adapter can be
ordered to provide the device with power.
Take the Ethernet cable that was provided in the box, and turn the base unit
upside down, and locate the area displayed below.
Connect one end of the Ethernet cable into the network connection port on the
bottom of the unit. It's characterized by the icon displayed below. Press until
it clicks into place.
Connect the other end of the Ethernet cable into a jack providing PoE or a PoE
adapter.
If the cable needs to be removed from the FLX UC 1000, depress the plastic
lever on the connection to the FLX UC 1000 and pull the cable out gently while
keeping that plastic lever depressed. Using force when removing this cable
may damage the cable and render it useless.
8
Advertisement
Table of Contents
