Table of Contents
Advertisement
Configuring the FLX UC 1000 for your VoIP Network
This section will provide details of how to configure the FLX UC 1000 to a call
manager. The information provided here is general to any call manager, and
provides the details of how to access the configuration settings on the FLX UC
1000 to enter in the specific call manager information.
Detailed configuration for specific call managers, including the mappings of
fields, is provided in the appendix of this manual.
There are three methods with which you can configure the FLX UC 1000 to
connect to the VoIP network – using the dialer, from the Web UI, or using a
provisioning server with Option 66.
Through the Dialer
Access the Main Menu, Settings, Admin Settings, VoIP Settings from the Dialer.
The default password to Admin Settings is 7386. If you've changed the
password to access the Web UI, the same password applies to the Admin
Settings menu.
Select each configuration item and use the [Edit] button at the bottom of the
screen to edit the item. After filling out the necessary information, hit the
[Apply] button to save the changes.
Return to the "Admin Settings" menu and scroll down to option 9, "Reboot".
Rebooting the device will apply the changes.
Through Web User Interface
Navigate to the SIP Settings Menu from the Gears Icon on the Home Screen.
Fill out the configuration details, then hit the "Submit" button hovering over
the top right of the screen to save your changes.
Reboot not required.
28
Advertisement
Table of Contents
