Error Message Summary; Common Error Codes - Insta360 Pro2 User Manual

Timelapse photography uses gyro corrections, which will cause jitter; if gyro correction is not used, please verify whether
it is due to floor jitter or tripod instability.

7.5 Error message summary

7.5.1 Common Error Codes

Error Code Meaning
310 MicroSD card not inserted
No enough storage space in
311
MicroSD card
MicroSD card is write-protected
312
or removed when recording video
MicroSD card's write speed
doesn't meet requirements due
313
to the accumulation of file
fragments.
The operation was not allowed
413
under this situation
414 Microphone error
415 Optical flow stitching error
The temperature of camera is too
417
high
418 Module is busy
430 File open error
431 File io error
432 No enough storage space
433 No storage device
Low writing speed of storage
434
device
435 MUX write error
436 MUX open error
437 Network reconnecting
438 Network fails to reconnect
439 Network disconnected
450 System goes stuck
Solution
Check if all the MicroSD cards are usable and inserted in the
camera.
Find out the problematic MicroSD card based on the card
number shown on the camera screen. Clean its files or change
other MicroSD card.
If the MicroSD card has been corrupted, please try formatting to
exFat again.
Please use computer to format the MicroSD card again.
Press any button to eliminate this error; if it doesn't help,
please restart the camera.
If you are using external microphone, please unplug it and plug
in again; then start to shoot.
Please try shooting again.
Wait and retry.
Try again.
Check if the SD card was write-protected.
Check if the SD card was write-protected.
Check the storage space of device.
Connect storage device.
Format the storage device to see whether it helps; if doesn't,
please change the storage device.
Restart the camera.
Restart the camera.
Wait.
Check the network.
Check the network.
Restart the camera.