First Use; Checking The Package Contents; Inserting The Batteries - Silvercrest KH2150 Operating Instructions Manual

First use

Unpacking the device / checking the package
contents
Attention!
Keep the plastic packaging well away from small children.
There is a risk of suffocation.
• Unpack the device and accessories.
• Check the package contents
- Universal remote control
- Operating instructions
- Manufacturer list with device code list
• Remove the protective foil from the LCD display (2).
Note: Transport damage
If you notice transport damage, contact customer service
(see Warranty section).

Inserting the batteries

Attention!
The universal remote control may only be operated with
1.5 volt batteries.
1. Open the battery compartment (20) in the direction in-
dicated by the arrow.
2. Insert the batteries as shown in the figure and close the
battery compartment.
The LCD display (2) is activated as long as the batteries are
inserted.
The following figure shows the LCD display (2) after the batteries
have been inserted or replaced.
5