Table of Contents
Advertisement
Background Illumination
When the lighting circumstances are poor you can activate
the display's background illumination. Bear in mind that this
will reduce the lifespan of the batteries.
1. Press once the LIGHT button t. From now on the LCD
display q will illuminate with each button press for
approx. 8 seconds.
2. Press this button once more to switch off the LCD
display's background illumination.
Child protection system
With the child protection system the channel buttons
(CH+, CH—, 0-9) can be locked for individual devices.
1. Hold down the SET button e for a little longer than
3 seconds.
2. With the or button h select "CONFIG" and
confirm with the OK button l.
3. With the or button h select "KIDS LOCK" and con-
firm with the OK button l. The LCD display q shows the
current device and always offers the setting "OFF" inde-
pendent of the current setting.
4. With the or button h select now between "ON"
(child protection on) or "OFF" (child protection off).
5. With the OK button l you save the setting. In the LCD
display q appears "SUCCESS" and then "KIDS LOCK".
6. To exit this menu press repeatedly the EXIT button j until
the standard display appears in the LCD display q.
SeTUP - System settings
In the system settings you undertake the following:
•
Programming the remote control to the devices to be
controlled
•
Setting the time of day, display contrast and child
protection
•
The "learning" of determined button commands
•
Setting up Macros
•
Assigning favourites
•
etc.
- 10 -
Hide quick links:
Advertisement
Table of Contents
