Load Mode - Intellijel Scales Manual

1/17/2019
To reset Scales and restore the Factory Scales:
1. Turn off the power to Scales.
2. Hold the SAVE button while powering Scales back on.
This erases any custom scale patterns you previously saved, and reverts Scales to its
factory default settings and banks of scale patterns (as detailed in
Appendix B: Factory Scales).
NOTE: This will not erase any stored sequences. If you wish to do that, hold the INTRVL
button on power up.
LOAD Mode
This mode loads either scale patterns or sequences from the EEPROM memory. The module
can store up to 35 custom scale patterns and 35 custom sequences, using five banks of seven
"slots." Specifically, "black key" buttons select the bank containing the scale/sequence you wish
to load, and "white key" buttons select the scale/sequence "slot."
To load a scale pattern:
1. Press LOAD to enter Load Mode for scale patterns.
Multipurpose buttons for the current bank & slot will light red, indicating you're loading a
scale pattern.
2. Press the "Black Key" button (C#, D#, F#, G#, A#) to select the bank that contains the
scale pattern you wish to load.
3. Press the "White Key" button (C, D, E, F, G, A, B) associated with the "slot" that stores
the scale pattern you want loaded.
4. Press LOAD to read the scale pattern from EEPROM (overwriting the currently active
scale), extinguishing the LOAD button and returning Scales to Scale Display mode.
NOTE: Long-press the LOAD button (>1 sec) to load sequences (instead of scale patterns), as
discussed in
the multipurpose buttons glow yellow.
https://docs.google.com/document/d/1E2YynODFarEabLqQuu7qZUZX6-dO9na7ODlIk6Os98k/edit#
Save and Load Sequences, later in the manual. If Sequence loading is activated,
Scales Manual - Google Docs
Scales
Page 29
30/48