Sanyo Sprint SCP-4000 User Manual page 15

Using Your Phone:
Basic operations to place and
receive calls
Turning your phone on and off.
When you're ready to turn your Sprint PCS Phone on, check to see
that the charged battery has been installed on the back of the phone
or that you have external power (meaning the cigarette lighter
adapter, hands-free car kit or AC adapter) with the battery
installed. Then, simply press . The red light flashes briefly
POWER
and the banner is displayed, which means you're ready to make a
call.
To turn your phone off, press for one second until "Powering
POWER
Off" is displayed. Then release . When your phone is turned
POWER
off, nothing is displayed on the screen.
Note: If is pressed for less than one second, the phone will
POWER
not turn off. This keeps your phone from being turned off
accidentally.
Standby mode.
Standby is the most basic state of the phone. The phone goes into
standby mode soon after you turn it on or whenever you press
. When your Sprint PCS Phone is on but no call is in
END
progress, the phone is in standby mode.
15