Gearshift Indicator - Suzuki VITARA series Owner's Manual

Table of Contents

Advertisement

OPERATING YOUR VEHICLE

Gearshift indicator

EXAMPLE
(1)
61MM0A133
(1) Gearshift indicator
In the following cases, the gearshift indica-
tor is indicated on the information display
when the ignition switch is in "ON" position
or the ignition mode is "ON".
• When the gearshift lever is in a position
other than "N" (Neutral).
• For vehicles equipped with the cruise
control, when the system is not in use.
3-21
The electronic control system monitors
driving conditions (such as vehicle speed
and/or engine revolution), and it shows
which gear position is appropriate for your
driving with the indication on the display.
If the UP/DOWN arrow and a gear position
other than what is currently selected are
indicated on the display while driving, we
recommend that you shift the gear up or
down to indicated position. This is the
appropriate gear position for a driving con-
dition that reduces the over revolution and
stress to the engine, and improves fuel
consumption.
For details on how to use the transaxle,
refer to "Using transaxle" in this section.
WARNING
The gearshift indicator is designed to
indicate the appropriate gear position
for your driving, however, this indica-
tor does not relieve the driver of any
responsibility
to
operate
changes attentively.
To drive safely, do not focus your
attention on the gearshift indicator,
pay attention to your driving situation
and shift up or down if necessary.
NOTE:
• The gearshift indicator is not indicated
when the gear position is in "N" (Neu-
tral).
• If you depress the clutch pedal while UP/
DOWN arrow is indicated, the indication
will disappear.
• In ordinary driving, UP arrow will disap-
pear when you release your foot from
the accelerator pedal.
If your vehicle is equipped with the adap-
tive cruise control and while it is working,
however, UP/DOWN arrow may be indi-
cated continuously depending on driv-
ing conditions. It means that the
indicated gear position is appropriate for
the current cruising speed.
• The indication of gearshift indicator tim-
ing may differ depending on the vehicle
condition and/or driving situation even in
the same vehicle speed and engine rev-
olution.
• If any of the electrical systems such as
the radar brake support system or the
®
ESP
is working, the gearshift indicator
will disappear temporarily.
gear
54P00-01E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VITARA series and is the answer not in the manual?

Questions and answers

Brian Bishop
February 2, 2025

How to set the dashboard clock on the 2017 all grip 1.6 model

1 comments:
Mr. Anderson
February 10, 2025

You can change the time on the dashboard clock through the information display. When adjusting the time, the clock will update automatically. For detailed steps, refer to the "Information display" section in the "BEFORE DRIVING" part of the owner's manual.

This answer is automatically generated

Matt Rodgers
March 9, 2025

No water from rear windscreen washer

1 comments:
Mr. Anderson
March 9, 2025

There may be no water coming from the rear windscreen washer on a Suzuki Vitara due to the following reasons:

1. The washer fluid reservoir may be empty.
2. The washer nozzle may be clogged.
3. The washer pump may be faulty.
4. The fluid line may be blocked or disconnected.
5. The washer motor may be damaged if the lever was held in when there was no fluid.

Check the washer fluid level, inspect the nozzle for blockages, and ensure the washer pump is functioning properly.

This answer is automatically generated

Dan Marinescu
April 7, 2025

how to activate the rain sensor for windscreen wipers?

1 comments:
Mr. Anderson
April 9, 2025

To activate the rain sensor for windscreen wipers on a Suzuki Vitara, set the wiper lever to the "AUTO" position. This enables the rain-sensing function, and the wipers will automatically operate when the system detects rain or snow on the windshield.

This answer is automatically generated

Table of Contents

Save PDF