Figure 11. Fixing Mounting Bracket On The Pole (3); Table 5. Parts And Tools For Fixing Cpe Outdoor On The Pole - Samsung 5G CPE Installation Manual

4

Figure 11. Fixing Mounting bracket on the Pole (3)

If it is level, the bubble of the
spirit level is positioned at the
center of both lines.
When fixing the mounting bracket on the pole, be sure to check the level of
bracket. After finishing the installation, adjust the level minutely.
When poor leveling happens, adjust the position of fasteners used to fix the
mounting bracket.
1

Table 5. Parts and Tools for Fixing CPE Outdoor on the Pole

Category
Parts
Recommended Torque Value
Working Tools
2
5G CPE Outdoor Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Check the level of mounting bracket on the pole and adjust the level, as
detailed in figure below.
To fix the CPE Outdoor on the pole mounting bracket
Ensure that the items mentioned in below table are available.
Description
Fasteners M5 × L14 SEMS (T25H)
(Fastened to the unit bracket)
M5 SEMS
 Screw Driver Bit (T25H)
 Torque Driver (20-90 lbf·in)
Hang the fasteners over the top groove of the pole mounting bracket, and
fix it using fasteners. This is depicted in figure below.
Confidential
Chapter 2 Installing System
2 EA
25 lbfin (29 kgf·cm)
then
16