Installing Harness System - Cosco EASY ELITE Instructions Manual
Convertible car seat rear facing: 5-40 lb and 19-40 in. 2.3-18 kg and 48-101.6 cm, forward facing: 22-50 lb and 29-45 in. 10.1-22.6 kg and 73.6-114.3 cm at least 1 year old, belt-positioning booster: 40-80 lb and 43-52 in. 18.1-36.3 kg and 110.1-132.1 cm
Table of Contents
Advertisement
Installing Harness System
1.
Insert Buckle's Metal
Retainer into Slot
Closest to Child
1
2
3
2.
Pull Metal Retainer
Completely Through
Pad and Shell
3.
Check Buckle
4.
Rethread Harness Strap
With sewn end of harness strap
loop facing the buckle, thread
harness strap down through hip
harness slot.
15
Buckle
MUST
face out.
You
MUST
use the 1st or 2nd
buckle slot when child restraint is
used rear facing.
Any slot can be used when
forward facing.
Pull up on buckle to make sure it
is secured.
The buckle
MUST
not pull out.
XXXXX
Installing Harness System
XXXXX
5.
Pull Harness Strap
Across Bottom of Shell
Push harness strap up through
other hip harness slot.
6.
Make Harness Strap
Even
Sewn ends of harness strap loops
MUST
7.
Thread Buckle and
Chest Clip
Harness strap ends go through
the back of buckle tongues and
through the chest clip front to
back as shown.
8.
Thread Harness Straps
into Shoulder Harness
Slots
face each other.
16
continued on next page
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EASY ELITE and is the answer not in the manual?
Questions and answers