Wireless Microphone Set-Up - Rockville RAM12BT V2 Owner's Manual

Wireless Microphone Set-Up

Your RAM BT unit comes with two wireless microphones. To connect the microphones to
the unit follow these steps:
1. Make sure the RAM BT unit power switch is in ON position.
2. Keep Master Volume at Min position.
3. Keep both Mic A Volume and Mic B Volume and Channel B wireless Mic Volume
at Min position.
4. Press the VHF power on button (red indicator LED should be on).
5. Switch on one microphone. It should automatically connect to the corresponding
channel and the LED for that channel should light up.
6. Repeat steps 1 through 5 for the second microphone.
7. Use the Mic A / Mic B volume controls to adjust each microphone's volume.
8. Now turn up the Master Volume to necessary volume by rotating clockwise.
1
POWER
4
7
MIC A
VOLUME
2
ON
5
MIC B
VOLUME
3
MIC A
VOLUME
8
MIC B
VOLUME
MIC A
VOLUME