Bosch I4 EasyComfort TDS40 Series Operating Instructions Manual page 3
Hide thumbs
Also See for I4 EasyComfort TDS40 Series:
- Operating instructions manual (167 pages) ,
- Operating instructions manual (167 pages) ,
- Operating instructions manual (22 pages)
Table of Contents
Advertisement
Available languages
Available languages
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the I4 EasyComfort TDS40 Series and is the answer not in the manual?
Questions and answers
How do I use the calc n clean
To use the Calc’nClean feature on the Bosch I4 EasyComfort TDS40 Series:
1. Ensure the water tank (7) is filled with water.
2. Plug in the power cord (5) and turn on the device using the on/off button (2).
3. Press and hold the Calc’nClean button (1) for 2 seconds until its indicator light stays on.
4. Wait until the indicator light (2) stops blinking and remains steady. You will hear two beeps.
5. Place the iron on the Calc’nClean collection tray (14) on a stable surface.
6. Do not remove the iron from the tray until the process is complete, as hot water and steam will be released to remove limescale and buildup.
This process ensures proper maintenance and steam performance of the iron.
This answer is automatically generated
Ho fatto correttamente la procedura per la rimozione del calcare ma la spia resta accesa come spegnerla?
To turn off the "Calc’nClean" indicator light on the Bosch I4 EasyComfort TDS40 Series after descaling, follow these steps:
1. Ensure the descaling process has been completed.
2. If the light is still on, restart and complete the descaling procedure again.
3. Fill the water tank if empty.
4. Press and hold the descaling button for 2 seconds until the indicator light stops blinking and stays on continuously.
5. Wait until the process finishes, indicated by beeps and the light turning off.
If the indicator remains on, repeat the descaling process as described in the manual.
This answer is automatically generated
I have tried to descale, as per instructions, my series 14 but both red lights stay on but nothing happens! The steam switch on the iron doesn’t do anything either