Download Print this page
SOMFY inteo CHRONIS UNO Installation Manual

SOMFY inteo CHRONIS UNO Installation Manual

Advertisement

Quick Links

INSTALLATION
1
Characteristics:
2
Installation:
Installation allowed only by authorized electrician.
Before connecting the unit, read the instructions carefully.
A
Mounting :
inteo
The CHRONIS UNO is an individual timer and manual control for AC motor.
The main function of the CHRONIS UNO is "to give controls according to the time".
In that way, one "UP" and one "DOWN" control per day can be programmed.
Weekly timer :
different times can be programmed for every day of the week.
Cosmic function :
the time of the automatic up and down controls are determined according to the season.
SEC function :
Thanks to a specific working mode (chosen by the end user), Chronis gives the impression
that a house is inhabited (automatic controls are sent within a window of +/- 15 minutes
around the programmed times.
80 mm
33 mm 17 mm
80 mm
CHRONIS UNO
Main supply : 220-240V 50Hz.
Class II product
Protection index IP40.
Output : ~250V 3A cosφ 0,8.
Output temporisation : activ for 180s.
Environmental conditions for use :
- temperature +5°C to +40°C (no condensation allowed).
- pollution degree typical for usual living space.
Time accuracy : +/- 5 minutes a year.
Power failure :
memorized open and closing time are not erased by a power failure.
SUPPLY
230V - 50 Hz
3 x 1,5 mm 2
®
guide
EN60730-1
EN50081-1
EN50082-1
date and time are stored up to 10 days.The
4 x 0,75 mm 2
CHRONIS UNO

Advertisement

loading
Need help?

Need help?

Do you have a question about the inteo CHRONIS UNO and is the answer not in the manual?

Questions and answers

Summary of Contents for SOMFY inteo CHRONIS UNO

  • Page 1 INSTALLATION guide inteo CHRONIS UNO The CHRONIS UNO is an individual timer and manual control for AC motor. The main function of the CHRONIS UNO is "to give controls according to the time". In that way, one “UP” and one “DOWN” control per day can be programmed. Weekly timer : different times can be programmed for every day of the week.
  • Page 2 Cabling : Earth Phase Respect the electrical standards as well as the following points: Neutral disconnect the main before carrying out any work. Earth 4 wires x 0,75 mm MAIN Neutral ensure that no forces act on screw terminals after installation. 3 wires x 1,5 mm Down LT motor...
  • Page 3 Configurations : The CHRONIS Uno offers five different operating modes, which can meet all personal requirements by pressing a button. Weekly program ( 20:00) The shutters are automatically opened or closed at the input opening and closing times. The factory setting for opening is 06:00 and 20:00 for closing. Different times can be input for each day of the week.
  • Page 4 Using: The CHRONIS Uno is initially configured to control a roller shutter but it is possible to configure the CHRONIS Uno to control a VENETIAN blind (orientation of the slats). Roller shutter : MOVE / STOP command By pressing briefly the push buttons, the shutter is activated in the corresponding direction.