Controller Battery Installation - Propel Trampolines Star Wars 74-Z Speeder Bike Flight Manual

use alcaline or
1.5V rechargable
batteries
notes
1 -unscrew and slide
2 -4 aa batteries
3 -Put back cover
all the leDs on the
controller shoulD be
flashing
remote control batterY
installation
1. on the back of the controller, unscrew and
slide off the battery cover - there is a screw
driver hidden in the right side arm of the
controller.
2. install 4 "aa" alkaline batteries (1.5v
rechargeable batteries are preferred) into the
controller. - check proper orientation!
3. replace the battery cover and secure it with
screws.
4. replace the screwdriver into the side of the
controller.
5. turn over the controller and push the power
button for 2 seconds, and verify that the led
10