Setting List - Zoom G1 Four Quick Manual

Setting list

Press to open the SETTING screen.
Press – to open the following settings, which correspond
to the icons.
1. CHAIN (reorder effects)
Effects in the current patch are shown in a list, and can be reordered by pressing
the starting location and destination.
2. PATCH (edit patch names and adjust volume)
Item Explanation
CHAR Change the character at the cursor position in the patch name.
Move the cursor position in the patch name.
SKIP Change the type of character at the cursor position in the patch name.
VALUE Adjust the patch volume.
3. SAVE (save and swap patches)
To save a patch by overwriting another patch, use
patch number. Then, press
To swap a patch, turn
4. SETUP (set operation functions)
Item Explanation
BPM Set the tempo used for the effects, rhythms and looper.
AUTO SAVE This function can automatically save effect parameter changes when they are made.
When OFF , a save confirmation screen will open whenever you switch patches.
PRESELECT
Use this function to select a non-adjacent patch and switch to it directly. Use
BANK HOLD
Limit to patches in the same bank when using
5. PWR/LCD (make power and the display settings)
Item Explanation
BATTERY Set the type of battery used so the amount of remaining battery charge can be accurate-
ly shown.
ECO The power can automatically turn off if no use occurs for 10 hours.
BACKLIGHT Set how long the display backlight stays illuminated.
CONTRAST Adjust the display contrast.
HINT
See the Operation Manual for detailed information about each setting.
and
to select SWAP when conducting the procedure above.
to select the patch, and press
,
at the same time.
at the same time.
and
10
1 2 3
and – to select the
to switch patches.
4 5
– for
and