Table of Contents
Advertisement
4. VP5300 Installation
This section provides information on how to install the ViVOpay VP5300 in an enclosure.
Note that the unit may be installed edgewise (vertically), or in a horizontal manner.
Parts List
4.1
Verify that you have the following hardware for the installation of the ViVOpay VP5300:
• ViVOpay VP5300 P/N SPTP2-988-33-2C-0C or SPTP2-988-33-2CD-0C.
• (Optional) ViVOpay VP5300 NFC Antenna P/N ID-80152002-001 or ID-80152002-002. You will
need this item, and its cable (P/N 80136204-001), if you will be using VP5300's contactless
(NFC) capabilities.
• USB cable P/N 80152210-001, or RS-232 cable P/N 80152211-001.
• Power supply P/N 140-2035-00.
Installation of Reader
4.2
Refer to the
VP5300 3-view
proceed to:
• Locate, mark, and drill holes for the four main mounting points of the unit, spaced 89mm
apart lengthwise (on center), and spaced 45mm apart (on center) along the short axis. Use a
#12 drill.
• Secure the unit to the enclosure with bolts or screws of appropriate depth. Note that the
anti-tamper nubs, located behind the mounting gasket on the unit's right side (when viewed
head-on; the side nearest the molded-in ViVOpay logo), must be depressed when the unit is
mounted. Ensure that the gasket is compressed to a degree necessary to ensure anti-tamper
nub depression (and to protect against unnecessary moisture ingress).
drawing. Verify that power cords can physically reach the unit. Then
15
ViVOpay VP5300 User Manual
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ViVOpay VP5300 and is the answer not in the manual?
Questions and answers