Nokia MetroHopper User Manual page 30

Hop end mode
One of the terminals forming a hop must be configured as the master and the
other as the slave. In order to change the hop end mode, you will need to
recommission the hop by using Radio Wizard.
In case external synchronisation is used, you can select a terminal also to function
as the synchronising master. See Product Description for more information
about burst synchronisation.
Transmission channel
Displays the channel in use.
Hop ID
This field displays the unique hop ID. Note that the master and the slave must
have the same hop ID.
Interleave status
Possible values for Interleave status are Off, Depth 2, and Depth 4. See Product
Description for more information about interleaving.
To change the interleave status, select the required value from the list. Note that
both ends of a radio hop must have the same interleave status.
DN99611394 © Nokia Networks Oy
Issue 2-0 en
Commissioning Nokia MetroHopper
15 (42)