Enhancing Your System - Sharp CD G14000 Operation Manual

Enhancing your system

CD-G14000
The connection cord is not included. Purchase a commercially
available cord as shown below.
Portable audio
player, etc.
To the line output jack
40
5
4
3
2
1
REMOTE
SENSOR
TIMER
POWER
ON/ STAND-BY
OPEN/
c
CLOSE
CD
5
TAPE
TAPE (1 (1 2) 2)
4
TUNER
(BAND) 3
PRESET PRESET
2
AUDIO
IN
1
TUNING TUNING
VOL. VOL.
PLAYBACK (PLAY & S TOP) RECORD/PLAYBACK
PHONES AUDIO IN
Audio cable
(not supplied)
Listening to sounds of Portable Audio Player,
etc.
1
Connect a Portable Audio Player etc. to the front AUDIO IN
jack.
2
Press the ON/STAND-BY button to turn the power on.
3
AUDIO IN
Press the AUDIO IN button.
4
Play the connected equipment.
You can enjoy sounds from the supplied speakers.
Note:
To prevent noise interference, place the unit away from the television.
Auto power on function:
When you press any of the following buttons, the unit turns on.
AUDIO IN button (main unit and remote control): The unit turns
on and the "AUDIO IN" function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, AUDIO IN).
To record sounds of Portable Audio Player, etc.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the AUDIO IN button.
3
Press the
4
Press the
5
Play the Portable Audio Player, etc.
button.
/ button.