Table of Contents
Advertisement
MAINTENANCE
TAPE 1
TAPE 2
SPECIFICATIONS
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
General
Power source:
AC 120 V, 60 Hz
Power consumption:
35 W
Dimensions:
Width; 10-5/8" (270 mm)
Height; 11-13/16" (300 mm)
Depth; 14-11/16" (373 mm)
Weight:
10.6 lbs. (4.8 kg)
Amplifier section
Output power:
10 watts minimum RMS per
channel into 8 ohms from
100 Hz to 20 kHz, 10 %
total harmonic distortion
Output terminals:
Speakers; 8 ohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
Compact disc player section
Type:
3-disc multi-play compact
disc player
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
D/A converter:
1-bit D/A converter
Frequency
response:
20 - 20,000 Hz
Dynamic range:
90 dB (1 kHz)
Tuner section
Frequency range:
FM; 87.5-108 MHz
AM; 530-1,720 kHz
Internal care
Dirty heads, capstans or pinch rollers can cause poor sound
and tape jams. Clean these parts with a cotton swab mois-
tened with commercial head/pinch roller cleaner or isopropyl
alcohol.
After long use, the deck's heads and capstans may become
magnetized, causing poor sound. Demagnetize these parts
once every 30 hours of playing/recording time by using a com-
mercial tape head demagnetizer. Read the demagnetizer's in-
structions carefully before use.
In order to ensure proper operation of the CD player, preven-
tative maintenance (cleaning of the Laser Pick-up lens) should
be performed periodically in order to keep the lens dust-free.
Lens cleaners are commercially available. Contact your local
CD software dealer for options.
External care
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then wipe with a dry cloth.
Do not use chemically treated cleaning cloths or other chemi-
cals.
Cassette deck section
Frequency response:
50-14,000 Hz (Normal tape)
Signal/noise ratio:
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Wow and flutter:
0.3 % (WRMS)
Speaker section
Type:
4" (10 cm) full-range speaker
Maximum input power: 20 W
Rated input power:
10 W
Impedance:
8 ohms
Dimensions:
Width; 8-11/16" (220 mm)
Height; 11-13/16" (300 mm)
Depth; 7-1/16" (180 mm)
Weight:
4.4 lbs. (2.0 kg)/each
16
Hide quick links:
Advertisement
Table of Contents
