Conditions Of Use - Sharp SL-5500 Startup Manual

00 Cover.book Page 71 Saturday, January 19, 2002 11:33 AM

Conditions of use

Your SL-5500 conforms to international regulations insofar as it is used under
normal conditions and in accordance with the following instructions.
Caring for your SL-5500
• Do not open or attempt to repair your SL-5500 yourself. The product may only be
repaired by authorized service personnel.
• Do not drop your SL-5500 or subject it to severe impacts. Bending the body can
damage the circuitry. Do not use extreme force when pressing the display or keys.
• Close the Display protection cover to protect the LCD from being scratched,
broken, or damaged when you carry it with other objects.
• Do not insert business cards, pens, etc. between the Display protection cover and
LCD. The LCD may be broken or damaged if the Display protection cover is
pressed with force.
• Do not use sharp, pointed objects or your fingernails to touch the display screen.
Before using your SL-5500, remove dirt and stain from the screen so as not to
damage the screen.
• Do not use solvents to clean your SL-5500. Use only a soft, dry cloth.
• Do not carry your SL-5500 in your back pocket as it could break when you sit
down. The display is made of glass and is particularly fragile.
Battery
• The SL-5500 consumes battery power even when turned off. Charge the battery
once every week even when it is not in use.
• If the battery charging alert is displayed on the screen, charge the battery as soon
as possible. If you continue using your SL-5500 ignoring the alert, the power will
not be turned on and all data and settings will be lost.
• Before removing the battery from the SL-5500, make sure the SL-5500 is turned
off.
• Change the battery as soon as it becomes old and weak. Using a weak battery
may result in lost data or damage from battery leaks.
• Make sure that your battery is inserted in the SL-5500 at all times, otherwise all
data and settings may be lost.
• Power supply may be blocked if there is dust on the battery terminals or the
terminals of the main unit. Use a soft dry cloth to wipe the terminals. Batteries can
cause damage, injury or burns if a conductive material touches the exposed
terminals.
71
Conditions of use