Step 5: Initial Settings - Sharp SL-5500 Startup Manual

00 Cover.book Page 10 Saturday, January 19, 2002 11:33 AM
10
Quick Start
Step 5
: Initial settings
Carry out the initial setup of the SL-5500 after completing the battery charge.
Performing a FULL RESET
You have to initialize the hardware prior to using the SL-5500.
Caution: When you push the FULL RESET button, the hardware will be reset.
All data created and all add-on applications installed in the SL-5500
will be deleted.
1.
Slide the battery replacement
switch on the rear side of the unit
to the "REPLACE BATTERY"
position.
2.
Open the battery compartment lid.
3.
Push the "FULL RESET" button on
the lower right side of the battery
compartment with the stylus.
Note: Do not use an object with a
breakable or sharp tip.
NORMAL OPERATION
REPLACE BATTERY
FULL RESET
button