Table of Contents
Advertisement
AHT-E300 ADSL ROUTER
Click [TCP/IP Properties] button, and IP address tab.
Step 5
You can choose one of the following options to set TCP/IP values.
Obtain an IP address
automatically
(Recommended)
Specify an IP address
Notice: When you want to use static IP address, you should set the IP
address as the same subnet with AHT-E300 ADSL Router.
Step 6
Click [OK] button. Windows may ask for original Windows installation
disk. Insert the installation disk if needed.
Step 7
Windows will ask you to restart the PC. Click [Yes] button.
The TCP/IP settings of PC have been completed.
If you want to obtain an IP address of PC
automatically from DHCP server of AHT-
E300, check on this radio button.
If you want to use an assigned (static) IP
address,
and set the IP Address as 10.0.0.1,
Subnet Mask as 255.255.255.0 and Gateway
10.0.0.2.
8
Advertisement
Table of Contents
