Related Manuals for Ebac CD30
Summary of Contents for Ebac CD30
- Page 1 Drawing : - TPC226 Issue : - 9 Date : - 10/11/14 CD30 / CD30E INDUSTRIAL DEHUMIDIFIER OWNER’S MANUAL www.eipl.co.uk Page 1 of 12...
-
Page 2: Package Contents
Drawing : - TPC226 Issue : - 9 Date : - 10/11/14 CD30 PACKAGE CONTENTS Item Description Quantity 1133500 Dehumidifier 3014338 PVC tube – 12mm I/D 3086101 Jubilee clip TPC226 Manual CD30E PACKAGE CONTENTS Item Description Quantity 1133500 Dehumidifier 1139504... - Page 3 The unit incorporates a welded steel chassis and is finished in an epoxy coating for resilience to damage caused by rough handling. The CD30 dehumidifier is fitted with an adjustable humidistat to enable you to select the level of dryness.
-
Page 4: Specifications
EFRIGERANT "This product contains fluorinated greenhouse gases covered by the Kyoto Protocol. The refrigeration system is hermetically sealed. The Global Warming Potential (GWP) of refrigerants used in products manufactured by Ebac Industrial Products Ltd is as follows R134a – 1300 R407c –... - Page 5 TEST FOR CORRECT OPERATION The following procedures should be followed to test the CD30 for correct operation. 1. After unpacking, examine all external features to confirm damage free shipment.
- Page 6 Drawing : - TPC226 Issue : - 9 Date : - 10/11/14 SPECIAL FEATURES (Where Fitted) Control Humidistat This humidistat operates in the same way as the normal humidistat to control the on/off function of the dehumidifier units, but is factory pre-set at 55% RH to maintain the relative humidity air at the set point.
-
Page 7: Routine Maintenance
Drawing : - TPC226 Issue : - 9 Date : - 10/11/14 ROUTINE MAINTENANCE WARNING: ENSURE THAT THE POWER CORD TO THE MACHINE HAS BEEN DISCONNECTED BEFORE CARRYING OUT ROUTINE MAINTENACE ON ITEMS 1, 2, 3, AND 4. To ensure continued full efficiency of the dehumidifier, maintenance procedures should be performed as follows: Clean the surface of the evaporator and condenser coils by blowing the dirt out from behind the fins with compressed air. - Page 8 Drawing : - TPC226 Issue : - 9 Date : - 10/11/14 REPAIRS Should an electrical component fail, consult the Factory Service Center to obtain the proper replacement part. If refrigerant gas is lost from the machine, it will be necessary to use a refrigeration technician to correct the fault.
-
Page 9: Troubleshooting
Drawing : - TPC226 Issue : - 9 Date : - 10/11/14 TROUBLESHOOTING YMPTOM AUSE EMEDY 1. Check the power from the Unit inoperative 1. No power to unit power supply panel. 1. Tighten fan 1. Loose fan on shaft 2. -
Page 10: Spare Parts List
Drawing : - TPC226 Issue : - 9 Date : - 10/11/14 CD30 SPARE PARTS LIST UMBER ESCRIPTION 1133500 Compressor 3022147 Condenser Coil 3020740 Evaporator Coil 1133501 Fan Motor 3035773 Fan Blade 3040129 Timer Board 1617990 Humidistat 3035145 Humidistat Knob... - Page 11 Drawing : - TPC226 Issue : - 9 Date : - 10/11/14 Page 11 of 12...
- Page 12 : - 9 Date : - 10/11/14 American Sales Office UK Head Office German Sales Office Ebac Industrial Products Ltd Ebac Industrial Products Inc Ebac Industrial Products Ltd. 700 Thimble Shoals Blvd. St Helens Trading Estate Gartenfelder Str. 29-37 Bishop Auckland Suite 109, Newport News Gebäude 35...
Need help?
Do you have a question about the CD30 and is the answer not in the manual?
Questions and answers