Messages And Signals - Sharp FO-1470 Operation Manual

all-ux510A.book Page 133 Thursday, September 14, 2000 9:05 AM

Messages and Signals

Display messages
CHECK PAPER SIZE
COVER OPEN
DOCUMENT JAMMED
FAX RX IN MEMORY
FILM END
FUNCTION MODE
HOLD
LCR DOWNLOADING
DOWNLOAD ERROR
The paper size setting is incorrect. Change the paper
size setting as explained on page 20.
The print compartment cover. Close it.
The original document is jammed. See the following
section, Clearing Paper Jams.
A fax has been received in memory because the
imaging film needs replacement, you have run out of
printing paper, or the paper is jammed. After you fix
the problem, press the START key to print out the fax.
The imaging film may need replacement. Check the
film and replace if necessary.
The FUNCTION key has been pressed.
The HOLD/SEARCH key has been pressed to put the
other party on hold during a phone conversation.
Press the HOLD/SEARCH key again to take the
other party off hold, or simpley lift the handset if was
placed on the cradle after initially pressing the HOLD/
SEARCH key.
The fax machine has called OpenLCR and is
receiving carrier rate data. This message only
appears if you have registered with OpenLCR.
The fax machine was unable to download rate data
from OpenLCR. Try downloading the data manually
as explained in Downloading (receiving) the rate data
manually on page 35.
Messages and Signals
133