Reset The Arlo Audio Doorbell; Arlo Chime Led - Arlo Audio Doorbell User Manual

Arlo Audio Doorbell LED behavior after set up
• Fading white. Your Arlo doorbell detected motion.
• Flashing white for 5 seconds. Your Arlo doorbell was pressed.
• Solid white. Two-way audio is in use.
• White fading off. Two-way audio has ended.

Reset the Arlo Audio Doorbell

Resetting your doorbell returns it to the factory settings. If you reset the doorbell,
you will need to set it up again with the Arlo app before you can use it.
1. Open your Arlo doorbell's battery cover.
Note: Don't remove the batteries.
2. Press and hold the Sync button for 10
seconds.
The LED quickly flashes white.

Arlo Chime LED

The Arlo Chime LED lights to indicate the chime status and activity.
Arlo Chime LED behavior during set up
• Fading white. Your Arlo Chime is ready to be set up.
• Slowly blinking white. Your Arlo Chime is applying new settings.
• Quickly flashing white. Your Arlo Chime is successfully set up.
• Pulsing amber. A set up error occurred.
22